Maintenance Manual > Adjustment > Adjustment Items > HEAD ID
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
4.2.6 HEAD ID
Outline
HEAD ID represents each head characteristic written at shipping. The variation between heads is unified by inputting
the value to printer.
Additionally, the number of shots is cleared by setting the indication part of the number of shots to "0".
As this machine reads the head ID from the mounted memory (ROM) on the print head at each startup, it
is not necessary to set the head ID.
You can confirm/change the head ID by the following procedures.
However, as the head ID you changed is not stored, it will return to the value set in the memory of the
print head when the power supply is turned OFF.
Work Procedures
FUNCTION
#ADJUST
<ent>
#ADJUST
HEAD ID
<ent>
P/N N2207920
S/N 0000-000000D
Vpp-Odd
16.4V
Vpp-Even 16.1V
HEAD ID
HEAD[1]
Vod =27.0 Vev =27.0
HEAD ID
HEAD[1]
Vod
=27.0
Vev
=27.2
© 2011 MIMAKI ENGINEERING CO.,LTD.
1. Select [#ADJUST] -> [HEAD ID].
2. Confirm the Head ID from the label stuck on head FFC.
Even row side
Odd row side
3. Select the input nozzle row (ID).
4. Input the driving voltages (Vod, Vev).
Value of Vpp-Odd
Value of Vpp-Even
[ENTER]: To select Head
[] / []: To move Cursor.
[] / []: To change Value
1.80 / 1.00
Remark
For this machine, Vpp-Odd indicated on FFC of the
head represents the even row and Vpp-Even rep-
resents the odd row. Be careful about it.
[END]: To fix and end
Rev.
2.0
1
2
3
4
5
6
7
8
4.2.6
R.2.0
P.1