2011 Mimaki Engineering Co.,Ltd - MIMAKI UJF-3042 Maintenance Manual

Maintenance Manual > Disassembly and Reassembly > Driving Parts > Y-axis Motor
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
6.3.2 Y-axis Motor
Two Screws
Hexagon Socket Head Screw
Bad
Example:
Bad
Example:
Belt biased to either upper
Good
Example:
Put it on the pulley center in
© 2011 MIMAKI ENGINEERING CO.,LTD.
6. Remove the Y Motor Assy from the Y-Motor BKT.
Screw : P4x10SMW x2
7. Loosen a Hexagon Socket Head Screw then remove the pulley
from the motor.
Pulley
8. Perform the assembly by reversing the disassembly procedure.
Belt tilted.
or lower.
parallel.
--- Remark
Pay attention to missing of the screw.
Put the belt on the center of both pulleys in parallel.
(Acceptable on the upper)
Rev.
2.0
1
2
3
4
5
6
7
8
6.3.2 R.2.0 P.2