2011 Mimaki Engineering Co.,Ltd - MIMAKI UJF-3042 Maintenance Manual

Maintenance Manual > Disassembly and Reassembly > Ink-related Parts > Cartridge Guide Assy.
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
6.2.6 Cartridge Guide Assy.
Screw(x2)
Ink Slot Guide
BKT1
Screw(x2)
Ink Slot Guide
BKT2
© 2011 MIMAKI ENGINEERING CO.,LTD.
6. Remove the Cap Nut, and pull of the Ink Tube..
7. Remove the Ink Slot Guide GASS(steel plate).
Screw : P3x6SMW x3
8. Remove the two screws that fix the Ink Slot Guide BKT1(steel
plate).
9. Remove the Cartridge Guide(Group1).
The Ink Slot Guide BKT1(steel plate) should be kept attached.
Cartridge
Guide(Group1)
10. Remove the two screws that fix the Ink Slot Guide BKT2(steel
plate).
11. Remove the Cartridge Guide(Group2).
The Ink Slot Guide BKT2(steel plate) should be kept attached.
Cartridge
Guide(Group2)
--- Remark
 Take care not to stain any object by ink dripping
and also not to lose the O-ring.
Important notes for the following steps 8 to 11.
The red circles in the above figure indicate the fitting
positions of the resin ribs from the Cartridge Guide
and the plate. Be careful not to break the ribs.
Rev.
2.0
1
2
3
4
5
6
7
8
6.2.6 R.2.0 P.2