2011 Mimaki Engineering Co.,Ltd - MIMAKI UJF-3042 Maintenance Manual

Maintenance Manual > Workflow > Driving Parts > Replacement of Z-Driving Screw
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
3.2.1 Replacement of Z-Driving Screw
 List of Replacement Procedures
Item
Advance prepa-  Arrangement of Y-Bar, Head and
1.
ration Table

Power OFF Main power OFF
2.

Covers Removal of the covers.
3.
Disassembly  Removal of the Tabel.
4.
and
 Replacement of Z-Driving Screw.
5.
Reassembly

Mounting of the Table.
6.
Power ON  Main power ON
7.
Check  Check of Table up/down operation
8.
Covers  Mounting of the covers
9.
© 2011 MIMAKI ENGINEERING CO.,LTD.
Work operation
Move the Y-Bar to the farthest position and bring the Head to the
cap position. Raise the Table to the highest position.
Remove the following covers.
Remove the Table.
Replace the Z-Driving Screw.
Mount the Table.
Execute [#TEST] -> [#AGEING].-> [Z SERVO]
Mount the covers which have been removed.
1.80 / 1.00 Remark
Z-Driving Screw
Description
• Front Cover •Rear Cover-TB
Rev.
2.0
1
2
Ref.
3
–
–
6.1.1
4
6.3.3
6.3.4
6.3.3
–
5
4.2.6
6.1.1
6
7
8
3.2.1 R.2.0 P.1