D-Link DXS-1100 series User Manual page 116

4 Configuration
The fields that can be configured are described below:
Link Detection Power Saving: Enable or disable the link detection state. When enabled, a port which has a
link down status will be turned off to save power to the Switch. This will not affect the port's capabilities when
the port status is link up.
Length Detection Power Saving: Enable or disable the length detection state.
Scheduled Port-shutdown Power Saving: Enable or disable applying the power saving by scheduled port
shutdown.
Scheduled Hibernation Power Saving: Enable or disable applying the power saving by scheduled
hibernation.
Scheduled Dim-LED Power Saving: Enable or disable applying the power saving by scheduled dimming
LEDs.
Administrative Dim-LED: Select this option to enable or disable the port LED function.
Type: Select the type of power saving. Options to choose from are Dim-LED and Hibernation.
Time Range: Enter the name of the time range to associate with the power saving type.
Click Apply to accept the changes made for each individual section.
Click Delete to remove the specified entry.
After clicking the Power Saving Shutdown Settings tab, the following page will appear.
Figure 4.155 – Green > Power Saving (Power Saving Global Settings)
D-Link 10 Gigabit Ethernet Switch User Manual
1 0 9
1 0 9