D-Link DXS-1100 series User Manual page 74

4 Configuration
Figure 4.93 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Settings
The fields that can be configured are described below:
Global State: Enable or disable IGMP snooping global state.
VID: Enter a VLAN ID from 1 to 4094, and select to enable or disable IGMP snooping on the VLAN.
VID: Enter a VLAN ID from 1 to 4094.
Click Apply to accept the changes made for each individual section.
Click Find to locate a specific entry based on the information entered.
Click Find All to view all the entries.
Click Show Detail to see the detail information of the specific VLAN.
Click Edit to re-configure the specific entry.
Enter a page number and click Go to navigate to a specific page when multiple pages exist.
After clicking Show Detail, the following window will appear.
Figure 4.94 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping VLAN Parameters
The window displays the detail information about IGMP snooping VLAN.
Click Modify to edit the information in the following window.
Click the X button at the upper-right side to close the window.
D-Link 10 Gigabit Ethernet Switch User Manual
6 7
6 7