Management > Rmon > Rmon Event Settings; Management > Web - D-Link DXS-1100 series User Manual

4 Configuration
Click Add to add a new entry based on the information entered.
Click Delete to remove the specified entry.
Enter a page number and click Go to navigate to a specific page when multiple pages exist.
Management > RMON > RMON Event Settings
This window is used to configure and display event entries.
The fields that can be configured are described below:
Index: Enter the index of the alarm entry between 1 and 65535.
Description: Enter a description for the RMON event entry. The string is up to 127 characters long.
Type: Select the RMON event entry type. Options to choose from are None, Log, Trap, and Log and Trap.
Community: Enter the community string. The string can be up to 127 characters.
Owner: Enter the owner string. The string can be up to 127 characters.
Click Add to add a new entry based on the information entered.
Click Delete to remove the specified entry.
Click View Logs to see the detail information of the specific port.
Enter a page number and click Go to navigate to a specific page when multiple pages exist.
After clicking View Logs, the following window will appear.
Click Back to return to the previous window.
Management > Web
This window is used to configure the Web settings on the Switch.
Figure 4.60 – Management > RMON > RMON Event Settings
Figure 4.61 – Management > RMON > Event Logs Table
4 8
4 8
D-Link 10 Gigabit Ethernet Switch User Manual