Security > Storm Control - D-Link DXS-1100 series User Manual

4 Configuration
The traffic segmentation member list can be comprised of different interface types, for example port and
port-channel in the same forwarding domain. If the interfaces specified by the command include a port-
channel, all the member ports of this port-channel will be included in the forwarding domain.
If the forwarding domain of an interface is empty, then there is no restriction on Layer 2 forwarding of
packets received by the port.
The fields that can be configured are described below:
From Port / To Port: Select the receiving port range used for the configuration here.
From Forward Port / To Forward Port: Select the forward port range used for the configuration here.
Click Add to add a new entry based on the information entered.
Click Delete to remove a new entry based on the information entered.
Security > Storm Control
This window is used to view and configure the storm control settings.
Figure 4.137 – Security > Traffic Segmentation Settings
Figure 4.138 – Security > Storm Control
9 6
9 6
D-Link 10 Gigabit Ethernet Switch User Manual