D-Link DXS-1100 series User Manual page 30

4 Configuration
Destination File: Enter the destination filename and path where the configuration file should be stored on
the Switch. This field can be up to 64 characters long. Select the running-config option to restore and
overwrite the running configuration file on the Switch. Select the startup-config option to restore and
overwrite the start-up configuration file on the Switch.
Replace: Replace the current running configuration.
Click Restore after selecting the backup settings file you want to restore.
Configuration Restore from TFTP
This window is used to restore the configuration from TFTP.
Figure 4.15 – Tools Menu > Configure Restore and Backup > Configuration Restore from TFTP
The fields that can be configured are described below:
TFTP Server IP: Restore the configuration from a remote TFTP server. Specify TFTP server IP address with
IPv4 or IPv6 address.
Source File: Enter the source filename and path of the configuration file located on the TFTP server here.
This field can be up to 64 characters long.
Destination File: Enter the destination filename and path where the configuration file should be stored on
the Switch. This field can be up to 64 characters long. Select the running-config option to restore and
overwrite the running configuration file on the Switch. Select the startup-config option to restore and
overwrite the start-up configuration file on the Switch.
Replace: Replace the current running configuration.
Click Restore after selecting the backup settings file you want to restore.
Configuration Backup to HTTP
This window is used to back up the configuration to HTTP.
Figure 4.16 – Tools Menu > Configure Restore and Backup > Configuration Backup to HTTP
The fields that can be configured are described below:
Source File: Enter the source filename and path of the configuration file located on the Switch here. This
field can be up to 64 characters long. Select the running-config option to back up the running configuration
file from the Switch. Select the startup-config option to back up the start-up configuration file from the
Switch.
Click Backup to save the current settings to your disk.
Configuration Backup to TFTP
This window is used to back up the configuration to TFTP.
D-Link 10 Gigabit Ethernet Switch User Manual
2 3
2 3