Appendix A - Technical Specifications; Hardware Specifications; Key Components / Performance; Port Functions - D-Link DXS-1100 series User Manual

Appendix A - Technical Specifications

Appendix A - Technical Specifications

Hardware Specifications

Key Components / Performance

Switching Capacity:
- DXS-1100-10TS: 200 Gbps
- DXS-1100-16TC: 320 Gbps
Max. Forwarding Rate
- DXS-1100-10TS: 148.801 Mpps
- DXS-1100-16TC: 238.081 Mpps
Forwarding Mode: Store and Forward
Packet Buffer memory:
- DXS-1100-10TS: 2MBytes
- DXS-1100-16TC: 2MBytes
DRAM: 256MBytes
Flash Memory: 128MBytes
Number of fans:
- DXS-1100-10TS: 2
- DXS-1100-16TC: 2
Fan start-up speed:
- DXS-1100-10TS: High speed
- DXS-1100-16TC: High speed
Fan speed adjust to high:
- DXS-1100-10TS: Rises above 40°C
- DXS-1100-16TC: Rises above 40°C
Fan speed adjust to low:
- DXS-1100-10TS: Falls below 36°C
- DXS-1100-16TC: Falls below 36°C

Port Functions

10GBASE-T ports compliant with the
following standards:
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3an
- IEEE 802.3az Energy Efficient Ethernet
- Supports Full-Duplex operations
- IEEE 802.3x Flow Control support for Full-
Duplex mode
- Auto MDI/MDIX
10G SFP+ ports compliant with the
following standards:
- IEEE 802.3z
- IEEE 802.3ae
- Supports Full-Duplex operations
SFP transceivers supported
- DEM-302S-LX (1000BASE-LX, Single-
mode, 2km)
- DEM-310GT (1000BASE-LX, Single-mode,
10km)
- DEM-311GT (1000BASE-SX, Multi-mode,
550m)
- DEM-312GT2 (1000BASE-SX, Multi-mode,
2km)
D-Link 10 Gigabit Ethernet Switch User Manual
- DEM-314GT (1000BASE-LHX, Single-
mode, 50km)
- DEM-315GT (1000BASE-ZX, Single-mode,
80km)
- DGS-712 (1000BASE-T Copper SFP,
100m)
SFP+ transceivers supported
- DEM-431XT-DD (10GBASE-SR, 80m:
OM1 & OM2 MMF, 300m: OM3 MMF)
- DEM-431XT (10GBASE-SR (w/o DDM),
80m: OM1 & OM2 MMF, 300m: OM3 MMF)
- DEM-432XT-DD (10GBASE-LR, 10km)
- DEM-432XT (10GBASE-LR (w/o DDM),
10km)
- DEM-433XT-DD (10GBASE-ER, 40km)
- DEM-433XT (10GBASE-ER (w/o DDM),
40km)
- DEM-434XT (10GBASE-ZR (w/o DDM),
- DEM-436XT-BXU (10GBASE-LR BiDi (w/o
DDM), 20km, TX: 1270nm, RX: 1330nm)
- DEM-436XT-BXD (10GBASE-LR BiDi (w/o
DDM), 20km, TX: 1330nm, RX: 1270nm )
Direct Attached Cables (DAC) with built-in
transceivers
- DEM-CB100S (10G, SFP+ to SFP+, DAC,
1m)
- DEM-CB300S (10G, SFP+ to SFP+, DAC,
3m)
- DEM-CB700S (10G, SFP+ to SFP+, DAC,
7m)
Physical & Environment
AC input, 100~240 VAC, 50/60Hz,
internal universal power supply
Operation Temperature: -5~50°C
Storage Temperature -40~70°C
Operation Humidity: 0%~95% RH
Storage Humidity: 0%~95% RH

Emission (EMI) Certifications

CE/FCC/C-Tick/VCCI/BSMI Class A

Safety Certifications

UL, CB , CE, BSMI Report

Features

L2 Features

Supports up to 16K MAC address
Supports 512 static MAC
Jumbo frame: Supports up to 9K bytes
IGMP snooping v1/v2 (v3 awareness):
1 1 2
1 1 2