L2 Features > L2 Multicast Control> Igmp Snooping > Igmp Snooping Mrouter Settings - D-Link DXS-1100 series User Manual

4 Configuration
Figure 4.96 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Groups Settings
The fields that can be configured are described below:
VID: Enter a VLAN ID of the multicast group.
Group Address: Enter an IP multicast group address.
From Port / To Port: Select the appropriate port range used for the configuration here.
VID: Click the radio button and enter a VLAN ID of the multicast group.
Group Address: Click the radio button and enter an IP multicast group address.
Click Apply to accept the changes made.
Click Delete to remove the specified entry.
Click Find to locate a specific entry based on the information entered.
Click Find All to view all the entries.
Enter a page number and click Go to navigate to a specific page when multiple pages exist.
L2 Features > L2 Multicast Control> IGMP Snooping > IGMP Snooping Mrouter Settings
This window is used to configure the specified interface(s) as the multicast router ports or as forbidden to be
multicast router ports on the Switch.
Figure 4.97 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Mrouter Settings
The fields that can be configured are described below:
VID: Enter a VLAN ID between 1 and 4094.
Configuration: Select the port configuration. Options to choose from are Port and Forbidden Port.
D-Link 10 Gigabit Ethernet Switch User Manual
6 9
6 9