Table of Contents
Advertisement
4 Configuration
The fields that can be configured are described below:
User Name: Enter the user account name here. This name can be up to 32 characters long.
Privilege: Select the privilege level for this account.
Password Type: Select the password type for this user account here. Options to choose from are None,
Plain Text and Encrypted. When selecting Encrypted, the password will not be encrypted from the plain-
text format to the encrypted format. Instead, the encrypted password must be entered.
Password: After selecting Plain Text or Encrypted as the Password Type, enter the password for this
user account here.
Click Apply to accept the changes made.
Click Delete to remove the specified entry.
Enter a page number and click Go to navigate to a specific page when multiple pages exist.
After clicking the Session Table tab, the following page will appear.
A list of active user account session will be displayed.
Management > Password Encryption
This window is used to configure whether to save the encryption of the password in the configuration file.
The fields that can be configured are described below:
Password Encryption State: Enable or disable the encryption of the password before stored in the
configuration file.
Click Apply to accept the changes made.
Management > SNMP > SNMP Global Settings
This window is used to configure the SNMP global settings and trap settings.
Figure 4.44 – Management > User Accounts Settings (Session Table)
Figure 4.45 – Management > Password Encryption
D-Link 10 Gigabit Ethernet Switch User Manual
3
9
3
9
Hide quick links:
Advertisement
Table of Contents
