Table of Contents
Advertisement
4 Configuration
The fields that can be configured are described below:
OUI Address: Enter the OUI MAC address.
Mask: Enter the OUI MAC address matching bitmask.
Description: Enter the description for the user-defined OUI with a maximum of 32 characters.
Click Apply to accept the changes made.
Click Delete to remove the specified entry.
L2 Features > VLAN > Voice VLAN > Voice VLAN Device
This window is used to show voice devices that are connected to the ports. The start time is the time when
the device is detected on this port.
L2 Features > VLAN > Voice VLAN > Voice VLAN LLDP-MED Device
This window displays the voice VLAN LLDP-MED voice devices connected to the Switch.
Figure 4.85 – L2 Features > VLAN > Voice VLAN > Voice VLAN LLDP-MED Device
L2 Features > STP > STP Global Settings
The Switch implements two versions of the Spanning Tree Protocol, the Rapid Spanning Tree Protocol
(RSTP) as defined by the IEEE 802.1D-2004 specification and a version compatible with the IEEE 802.1D-
98 STP. RSTP can operate with legacy equipment implementing IEEE 802.1D-98, however the advantages
of using RSTP will be lost.
The IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP) evolved from the 802.1D-98 STP standard.
RSTP was developed in order to overcome some limitations of STP that impede the function of some recent
switching innovations. The basic function and much of the terminology is the same as STP. Most of the
Figure 4.83 – L2 Features > VLAN > Voice VLAN > Voice VLAN OUI
Figure 4.84 – L2 Features > VLAN > Voice VLAN > Voice VLAN Device
D-Link 10 Gigabit Ethernet Switch User Manual
6
0
6
0
Hide quick links:
Advertisement
Table of Contents
