L2 Features > Lldp > Lldp Dot3 Tlvs Settings - D-Link DXS-1100 series User Manual

4 Configuration
The fields that can be configured are described below:
From Port / To Port: Select the appropriate port range used for the configuration here.
Port VLAN: Enable or disable the port VLAN ID TLV to send. The Port VLAN ID TLV is an optional fixed
length TLV that allows a VLAN bridge port to advertise the port's VLAN identifier (PVID) that will be
associated with untagged or priority tagged frames.
VLAN Name: Enable or disable the VLAN name TLV to send, and enter the ID of the VLAN in the VLAN
name TLV.
Protocol Identity: Enable or disable the Protocol Identity TLV to send, and the protocol name. Options for
protocol name to choose from are None, LACP, STP, and All.
Click Apply to accept the changes made.
L2 Features > LLDP > LLDP Dot3 TLVs Settings
This window is used to configure an individual port or group of ports to exclude one or more IEEE 802.3
organizational specific TLV data type from outbound LLDP advertisements.
Figure 4.110 – L2 Features > LLDP > LLDP Dot1 TLVs Settings
7
7
D-Link 10 Gigabit Ethernet Switch User Manual
9
9