Log Backup - D-Link DXS-1100 series User Manual

4 Configuration
Figure 4.17 – Tools Menu > Configure Restore and Backup > Configuration Backup to TFTP
The fields that can be configured are described below:
TFTP Server IP: Back up the configuration from a remote TFTP server. Specify TFTP server IP address with
IPv4 or IPv6 address.
Source File: Enter the source filename and path of the configuration file located on the switch here. This
field can be up to 64 characters long. Select the running-config option to back up the running configuration
file from the Switch. Select the startup-config option to back up the start-up configuration file from the
Switch.
Destination File: Enter the destination filename and path where the configuration file should be stored on
the TFTP server. This field can be up to 64 characters long.
Click Backup to save the current settings to the TFTP server.

Log Backup

Allow the logs to be saved to HTTP or TFTP.
Log Backup to HTTP
This window is used to back up the logs to HTTP.
The fields that can be configured are described below:
Log Type: Select the log type that will be backed up to the local PC using HTTP. When the System Log
option is selected, the system log will be backed up. When the Attack Log is selected, the attack log will be
backed up.
Click Backup to save the current settings to your disk.
Log Backup to TFTP
This window is used to back up the logs to TFTP.
Figure 4.18 – Tools Menu > Log Backup
Figure 4.19 – Tools Menu > Log Backup > Log Backup to HTTP
2
2
D-Link 10 Gigabit Ethernet Switch User Manual
4
4