Table of Contents
Advertisement
4 Configuration
Web-based Management
After clicking Exit in Smart Wizard, you will see the screen below:
Function Tree
The above image is the Web-based Management screen. The three main areas are the Tool Bar on top, the
Function Tree, and the Main Configuration Screen.
The Tool Bar provides a quick and convenient way for essential utility functions like firmware and
configuration management on the left, and the username with current IP address and the Logout button on
the right. Click Logout to end this session.
By choosing different functions in the Function Tree, you can change all the settings in the Main
Configuration Screen. The main configuration screen will show the current status of your Switch by clicking
the model name on top of the function tree.
Finally, by clicking the D-Link logo at the upper-left corner of the screen you will be redirected to the D-Link
website.
Tool Bar
Main Configuration Screen
Figure 4.4 – Web-based Management
NOTE: If you close the web browser without
clicking the Logout button first, then it will be seen
as an abnormal exit and the login session will still
be occupied.
1
9
1
9
D-Link 10 Gigabit Ethernet Switch User Manual
Hide quick links:
Advertisement
Table of Contents
