Table of Contents
Advertisement
4 Configuration
Click Apply to accept the changes made.
Management > SNMP > SNMP User Table Settings
The fields that can be configured are described below:
User Name: Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP users.
Group Name: Enter the SNMP group name to which the user belongs. The syntax is general string that
does not allow spaces.
SNMP Version: Select the SNMP version. Options to choose from are v1, v2c, and v3.
SNMP V3 Encryption: When selecting v3 in the SNMP Version drop-down list, this option is available.
Options to choose from are None, Password, and Key.
Auth-Protocol: When selecting v3 in the SNMP Version drop-down list, and selecting either Password or
Key in the SNMP V3 Encryption drop-down list, this option is available. Select the authentication level.
Options to choose from are MD5, and SHA.
MD5 - Select to use the HMAC-MD5-96 authentication level. This field will require the user to enter a
password or a key.
SHA - Specify that the HMAC-SHA authentication protocol will be used. This field will require the
user to enter a password or a key.
Priv-Protocol: When selecting v3 in the SNMP Version drop-down list, and selecting either Password or
Key in the SNMP V3 Encryption drop-down list, this option is available. Select the private protocol. Options
to choose from are None, and DES56.
None - Specify that no authorization protocol is in use.
DES56 - Specify that DES 56-bit encryption is in use, based on the CBC-DES (DES-56) standard.
This field will require the user to enter a password or a key.
Click Add to add a new entry based on the information entered.
Click Delete to remove the specified entry.
Management > SNMP > SNMP Host Table Settings
This window is used to configure and display the recipient of the SNMP notification.
Figure 4.52 – Management > SNMP > SNMP User Table Settings
4
D-Link 10 Gigabit Ethernet Switch User Manual
4
4
4
Hide quick links:
Advertisement
Table of Contents
