Connection Status - Pppoe & Pppoa - LevelOne WBR-3407 User Manual

System
Device Name
Firmware Version
Buttons
Connection Details
Attached Devices
Refresh Screen
Connection Status - PPPoE & PPPoA
If using PPPoE (PPP over Ethernet) or PPPoA (PPP over ATM), a screen like the following
example will be displayed when the "Connection Details" button is clicked.
Data – PPPoE/PPPoA Screen
Connection Time
PPPoE Link Status
Negotiation
IP Address
Network Mask
The current name of the WBR-3407. This is also the "hostname"
provided to ISPs who request this information.
The version of the current firmware installed.
Click this button to open a sub-window and view a detailed
description of the current connection.
This will open a sub-window, showing all LAN and Wireless
devices currently on the network.
Update the data displayed on screen.
Figure 52: PPPoE Status Screen
This indicates how long the current connection has been
established.
This indicates whether or not the connection is currently
established.
•
If the connection does not exist, the "Connect" button can be
used to establish a connection.
•
If the connection currently exists, the "Disconnect" button
can be used to break the connection.
This indicates the status of the PPPoE Server login.
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
The Network Mask associated with the IP Address above.
Operation and Status
55