Wireless Lan Configuration - LevelOne NetCon WBR-3408 User Manual

11g wireless broadband router
Hide thumbs Also See for NetCon WBR-3408:
Table of Contents

Advertisement

Wireless LAN Configuration

To allow Wireless Stations to use the Access Point, the Wireless Stations and the
Access Point must use the same settings, as follows:
Mode
SSID (ESSID)
Wireless
Security
On client Wireless Stations, the mode must be set to "Infrastruc-
ture".
(The Access Point is always in "Infrastructure" mode.)
Wireless Stations should use the same SSID (ESSID) as the
Access Point they wish to connect to. Alternatively, the SSID can
be set to "any" or null (blank) to allow connection to any Access
Point.
The Wireless Stations and the Access Point must use the same
settings for Wireless security. (None, WEP, WPA-PSK, WPA2-
PSK, WPA-802.1x)
If Wireless security remains disabled on the Wireless Rou-
ter, all stations must have wireless security disabled.
If Wireless security is enabled on the Wireless Router, each
station must use the same settings as the Wireless ADLS
Router.
111

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetCon WBR-3408 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Wbr-3408

Table of Contents