Displaying And Maintaining Ptp; Ptp Configuration Example (Ieee 1588 Version 2) - HP 5920 Configuration Manual

Displaying and maintaining PTP

Execute display commands in any view and the reset command in user view.
Task
Display PTP clock information.
Display the delay correction history.
Display information about foreign master nodes.
Display PTP information on an interface.
Display PTP statistics.
Display PTP clock time properties.
Clear PTP statistics.

PTP configuration example (IEEE 1588 Version 2)

Network requirements
As shown in
Configure all devices to use PTP standard IEEE 1588 Version 2.
•
• Configure the clock node type of Device A and Device C as OC, and that of Device B as P2PTC. All
clock nodes elect a GM through BMC based on their respective default GM attributes.
Configure the delay measurement mechanism for Device A and Device C as p2p.
•
Figure 25 Network diagram
OC
Device A
Configuration procedure
1. Configure Device A:
# Specify the PTP standard as IEEE 1588 Version 2.
<DeviceA> system-view
[DeviceA] ptp profile 1588v2
# Specify the clock node type as OC.
[DeviceA] ptp mode oc
Figure 25, a PTP domain comprises Device A, Device B, and Device C.
P2PTC
XGE1/0/1 XGE1/0/1
Device B
PTP domain
Command
display ptp clock
display ptp corrections
display ptp foreign-masters-record [ interface
interface-type interface-number ]
display ptp interface [ interface-type interface-number
| brief ]
display ptp [ brief | interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
display ptp time-property
reset ptp statistics [ interface interface-type
interface-number ]
OC
XGE1/0/2 XGE1/0/1
Device C
71