Elements In A Monitor Policy - HP 5920 Configuration Manual

RTM
RTM manages the creation, state machine, and execution of monitor policies.
EAA monitor policies
A monitor policy specifies the event to monitor and actions to take when the event occurs.
You can configure EAA monitor policies by using the CLI or Tcl.
A monitor policy contains the following elements:
• One event.
At least one action.
•
At least one user role.
•
• One running time setting.
For more information, see

Elements in a monitor policy

Event
Table 19 shows types of events that EAA can monitor.
Table 19 Monitored events
Event type
CLI
Syslog
Process
Hotplug
Interface
SNMP
"Elements in a monitor
Description
CLI event occurs in response to monitored operations performed at the CLI. For example,
a command is entered, a question mark (?) is entered, or the Tab key is pressed to
complete a command.
Syslog event occurs when the information center receives the monitored log within a
period.
NOTE:
The log generated by the EAA RTM does not trigger the monitor policy to run.
Process event occurs in response to a state change (caused by an automatic system task)
of the monitored process (such as an exception, shutdown, start, or restart).
Hotplug event occurs when a master/subordinate switchover occurs, or when a device
joins or leaves the IRF fabric.
Each interface event is associated with two user-defined thresholds: start and restart.
An interface event occurs when the monitored interface traffic statistic crosses the start
threshold in the following situations:
•
The statistic crosses the start threshold for the first time.
•
The statistic crosses the start threshold each time after it crosses the restart threshold.
Each SNMP event is associated with two user-defined thresholds: start and restart.
SNMP event occurs when the monitored MIB variable's value crosses the start threshold
in the following situations:
•
The monitored variable's value crosses the start threshold for the first time.
•
The monitored variable's value crosses the start threshold each time after it crosses the
restart threshold.
policy."
210