Line
Line 2
Suspending monitor policies
This task suspends all CLI-defined and Tcl-defined monitor policies except for the policies that are
running.
To suspend monitor policies:
Step
1.
Enter system view.
2.
Suspend monitor policies.
Displaying and maintaining EAA settings
Execute display commands in any view.
Task
Display user-defined EAA environment variables.
Display EAA monitor policies.
Configuration examples
CLI-defined policy configuration example
Network requirements
Configure a policy from the CLI to monitor the event that occurs when a question mark (?) is entered at
the command line that contains letters and digits.
When the event occurs, the system executes the command and sends the log message "hello world" to
the information center.
Content
Actions
Command
system-view
rtm scheduler suspend
Requirements
You can reference a variable name in the
$variable_name format instead of specifying a
value for an argument when you define an
action.
The following actions are available:
•
Standard Tcl commands.
•
EAA-specific Tcl commands.
•
Commands supported by the device.
Command
display rtm environment [ var-name ]
display rtm policy { active | registered } [ policy-name ]
216
Remarks
N/A
To resume monitor polices, use
the undo rtm scheduler suspend
command.