Download Print this page

HP 5920 Configuration Manual: Default Output Rules For Security Logs

Hide thumbs

Advertisement

Table 8 Default output rule for diagnostic logs
Destination
Diagnostic log file

Default output rules for security logs

Security logs can only be output to the security log file, and cannot be filtered by source modules and
severity levels.
Table 9 Default output rule for security logs
Destination
Security log file
Default output rules for hidden logs
Hidden logs can be output to the log host, the log buffer, and the log file.
output rules for hidden logs.
Table 10 Default output rules for hidden logs
Destination
Log host
Log buffer
Log file
Default output rules for trace logs
Trace logs can only be output to the trace log file, and cannot be filtered by source modules and severity
levels.
Table 1 1
Table 11 Default output rules for trace logs
Destination
Trace log file
Log formats
The format of logs varies with output destinations.
which might be different from what you see. The actual format depends on the log resolution tool used.
Log source modules
All supported modules
Table 9
shows the default output rule for security logs.
Log source modules
All supported modules
Log source modules
All supported modules
All supported modules
All supported modules
shows the default output rules for trace logs.
Log source modules
All supported modules
Output switch
Enabled
Output switch
Disabled
Output switch
Enabled
Enabled
Enabled
Output switch
Enabled
Table 12
shows the original format of log information,
79
Severity
Debug
Severity
Debugging
Table 10
shows the default
Severity
Informational
Informational
Informational
Severity
Debugging

Advertisement

This manual also for:

5900

Comments to this Manuals

Symbols: 0
Latest comments: