HP 5920 Configuration Manual page 147

If the action to be triggered is configured as trap-only for a reaction entry, when the state of the entry
changes, a trap message is generated and sent to the NMS.
Configuration procedure
Before you configure threshold monitoring, configure the destination address of the trap messages by
using the snmp-agent target-host command. For more information about the command, see Network
Management and Monitoring Command Reference.
To configure threshold monitoring:
Step
1. Enter system view.
2. Create an NQA
operation and
enter NQA
operation view.
3. Enter NQA
operation view.
4. Enable sending
traps to the NMS
when specific
conditions are met.
Command
system-view
nqa entry admin-name operation-tag
type { dhcp | dlsw | dns | ftp | http | icmp-echo
| snmp | tcp | udp-echo | udp-jitter | voice }
reaction trap { probe-failure
consecutive-probe-failures | test-complete |
test-failure cumulate-probe-failures }
137
Remarks
N/A
By default, no NQA operation
is created.
Path jitter does not support the
threshold monitoring function.
By default, no traps are sent to
the NMS.
The UDP jitter and voice
operations only support the
test-complete keyword.