Download Print this page

HP 5920 Configuration Manual: Configuring The Collaboration Function

Hide thumbs

Advertisement

Step
5.
(Optional.) Specify the
interval at which the NQA
operation repeats.
6.
(Optional.) Specify the
probe times.
7.
(Optional.) Specify the
probe timeout time.
8.
(Optional.) Specify the
TTL for probe packets.
9.
(Optional.) Specify the
ToS value in the IP packet
header of probe packets.
10.
(Optional.) Enable the
routing table bypass
function.
11.
(Optional.) Specify the
VPN where the operation
is performed.

Configuring the collaboration function

Collaboration is implemented by associating a reaction entry of an NQA operation with a track entry.
The reaction entry monitors the NQA operation. If the number of operation failures reaches the specified
threshold, the configured action is triggered.
To configure the collaboration function:
Step
1.
Enter system view.
2.
Create an NQA operation
and enter NQA operation
view.
Command
frequency interval
probe count times
probe timeout timeout
ttl value
tos value
route-option bypass-route
vpn-instance
vpn-instance-name
Command
system-view
nqa entry admin-name
operation-tag
135
Remarks
For a voice or path jitter operation, the
default setting is 60000 milliseconds.
For other operations, the default setting is 0
milliseconds. Only one operation is
performed.
If the operation is not completed when the
interval expires, the next operation does
not start.
By default, an NQA operation performs
one probe.
This command is not available for the path
jitter, UDP jitter, and voice operations.
Each of these operations performs only one
probe.
The default setting is 3000 milliseconds.
This command is not available for the path
jitter, UDP jitter, and voice operations.
The default setting is 20.
This command is not available for the
DHCP and path jitter operations.
The default setting is 0.
By default, the routing table bypass
function is disabled.
This command is not available for the
DHCP and path jitter operations.
By default, the operation is performed on
the public network.
Remarks
N/A
By default, no NQA operation is
created.

Advertisement

This manual also for:

5900

Comments to this Manuals

Symbols: 0
Latest comments: