On the Add Device Group page, enter a service group name (for example, DB_1), and then
Figure 6 Adding a device group
Select Service > Resource > Device Class from the top navigation bar.
On the Add Device Class page, enter a device class name for devices in equipment room A,
and then click OK.
In this example, the device class for devices in equipment room A is Device_A.
Figure 7 Adding a device class
Repeat the previous two steps to create a device class for devices in equipment room B.
Add the devices as CPEs:
Select Service > BIMS > Add CPE from the top navigation bar.
On the Add CPE page, enter or select basic settings for device A, and then click OK.