Download Print this page

Advertisement

Step
6.
(Optional.) Set the alarm
threshold of the security log
file usage.

Managing the security log file

To manage and maintain the security log file, the security log administrator must pass local AAA
authentication first. For more information about security log administrator, see Security Configuration
Guide.
To manage the security log file:
Task
Display a summary of the security
log file.
Change the directory of the security
log file.
Manually save all the contents in
the security log file buffer into the
security log file.
Saving diagnostic logs to the diagnostic log file
By default, the system saves diagnostic logs from the diagnostic log file buffer to the diagnostic log file
every 24 hours. You can adjust the saving interval or manually save diagnostic logs to the diagnostic log
file. After saving diagnostic logs into the diagnostic log file, the system clears the diagnostic log file
buffer.
The diagnostic log file has a maximum capacity. When the capacity is reached, the system replaces
earliest diagnostic logs with new logs.
To enable saving diagnostic logs to a diagnostic log file:
Step
1.
Enter system view.
2.
Enable the information center.
3.
Enable saving diagnostic logs
to the diagnostic log file.
Command
info-center security-logfile
alarm-threshold usage
Command
display security-logfile summary
1.
system-view
2.
info-center security-logfile
directory dir-name
security-logfile save
Command
system-view
info-center enable
info-center logfile enable
87
Remarks
By default, the alarm threshold of
the security log file usage is 80.
When the usage of the security log
file reaches 80%, the system will
inform the user.
Remarks
Available in user view.
By default, the security log file is
saved in the seclog directory in the
root directory of the storage device.
The configuration made by this
command cannot survive an IRF
reboot or a master/subordinate
switchover.
Available in any view.
Remarks
N/A
By default, the information center is
enabled.
By default, saving diagnostic logs
to the diagnostic log file is
enabled.

Advertisement

This manual also for:

5900

Comments to this Manuals

Symbols: 0
Latest comments: