Configuring The Tcp Operation - HP 5920 Configuration Manual

Step
3. Specify the SNMP type and
enter its view.
4. Specify the destination
address of SNMP packets.
5. (Optional.) Specify the source
port of SNMP packets.
6. (Optional.) Specify the source
IP address of SNMP packets.

Configuring the TCP operation

The TCP operation measures the time for the NQA client to establish a TCP connection to a specific port
on the NQA server.
The TCP operation requires both the NQA server and the NQA client. Before you perform a TCP
operation, configure a TCP listening service on the NQA server. For more information about the TCP
listening service configuration, see
To configure the TCP operation:
Step
1. Enter system view.
2. Create an NQA operation
and enter NQA operation
view.
3. Specify the TCP type and
enter its view.
4. Specify the destination
address of TCP packets.
5. Specify the destination port of
TCP packets.
6. (Optional.) Specify the source
IP address of TCP packets.
Command
type snmp
destination ip ip-address
source port port-number
source ip ip-address
"Configuring the NQA
Command
system-view
nqa entry admin-name
operation-tag
type tcp
destination ip ip-address
destination port port-number
source ip ip-address
129
Remarks
N/A
By default, no destination IP address is
specified.
By default, no source port number is
specified.
By default, no source IP address is
specified.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
SNMP packets can be sent out.
server."
Remarks
N/A
By default, no NQA operation is
created.
N/A
By default, no destination IP address is
specified.
The destination address must be the
same as the IP address of the listening
service configured on the NQA server.
By default, no destination port number
is configured.
The destination port number must be
the same as that of the listening service
on the NQA server.
By default, no source IP address is
specified.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
TCP packets can be sent out.