Loop Detection Configuration Menu - Panasonic PN28248 Operation Manual

Hide thumbs Also See for PN28248:
Table of Contents

Advertisement

4.6.11. Loop Detection Configuration Menu

On the Advanced Switch Configuration Menu, pressing "D" opens the Loop Detec-
tion Configuration Menu screen as shown in Fig. 4-74. On this screen, you can con-
figure the Loop detection and blocking function settings.
For network configuration, refer to Appendix D "Network Configuration Example
and Notes Using Loop Detection and Blocking Function" in Basic Operation Man-
ual.
PN28248 Local Management System
Advanced Switch Configuration -> Loop Detection Configuration Menu
Global Loop Detection Status: Enabled
Port Trunk Link
---- ----- ---- ----------- ------------- ---------- ---------------
1
---
2
---
3
1 Down Forwarding
4
1 Down Forwarding
5
2 Down Forwarding
6
2 Down Forwarding
7
---
8
---
9
---
10
---
11
---
12
---
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[E]nable/Disable Loop Detection
Loop History [I]nformation
Command>
Enter the character in square brackets to select option
Screen Description
Global Loop Detec-
tion Status
Port
Trunk
Link
State
Loop Detect
State
Loop Detect
Down Forwarding
Enabled
Down Forwarding
Enabled
Enabled
Enabled
Enabled
Enabled
Down Forwarding
Enabled
Down Forwarding
Enabled
Down Forwarding
Enabled
Down Forwarding
Enabled
Down Forwarding
Enabled
Down Forwarding
Enabled
Fig. 4-74 Loop Detection Configuration Menu
Displays the status of the Loop detection and blocking function.
Enabled
The Loop detection and blocking function is enabled. (Fac-
tory default setting)
Disabled
The Loop detection and blocking function is disabled.
Displays the port number.
Displays the link aggregation group ID.
Displays the link-up status.
Up
Linking up.
Down
Linking down.
Displays the operation of the Loop detection and blocking function.
Forwarding
Sending packets normally.
Loop Detect
Detecting a loop and blocking a port.
Displays the status of the Loop detection and blocking function for each
port.
Enabled
The Loop detection and blocking function is enabled.
(Factory default setting: Ports 1 to 24)
Disabled
The Loop detection and blocking function is disabled.
(Factory default setting: Ports 25 to 26)
Recovery
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Set Port [L]oop Detect Status
Set Port Recovery [S]tatus
Set Port Recovery [T]imer
[Q]uit to previous menu
158
Recovery Time
60
60
60
60
60
60
60
60
60
60
60
60

Advertisement

Table of Contents
loading

Table of Contents