Table of Contents
Advertisement
4.6.5.
Quality of Service Configuration
On the Advanced Switch Configuration Menu, pressing "C" opens the Quality of
Service Configuration Menu screen, as shown in Fig. 4-49. On this screen, you can
configure the settings of QoS (Quality of Service) of the Switching Hub.
PN28248 Local Management System
Advanced Switch Configuration Menu -> Quality of Service Configuration Menu
[T]raffic Class Configuration
[E]gress Rate Limiting
[D]iffserv Configuration
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Available commands are listed below.
T
Move to the Traffic Class configuration screen.
Press "T." The screen changes to "Traffic Class Configuration Menu." For the configuration
contents, refer to the next section (4.6.5.a).
E
Move to the bandwidth control configuration screen.
Press "E." The screen changes to "Egress Rate Limiting." For the configuration contents, refer
to the next section (4.6.5.c).
D
Move to the DiffServ configuration screen.
Press "D." The screen changes to "Diffserv Configuration Menu." For the configuration con-
tents, refer to the next section (4.6.5.d).
Q
Return to the parent menu.
Fig. 4-49 QoS Configuration
113
Advertisement
Table of Contents
