Vlan Port Configuration Menu - Panasonic Switch-M12PWR Operation Manual

4.7.1.e. VLAN Port Configuration Menu
On the VLAN Management Menu, pressing "S" command opens the VLAN
Port Configuration Menu screen, as shown in Fig. 4-7-5. In this screen, you
can configure VLAN-related settings by port.
PN23129K/PN23129A Local Management System
VLAN Management -> VLAN Port Configuration Menu
Port PVID Acceptable Frame Type
---- ---- --------------------- --------
1 1
2 1
3 1
4 1
5 1
6 1
7 1
8 1
-------------------------------- <COMMAND> -----------------------------------
[N]ext page
[P]revious Page
Set Port [V]ID
Command>
Enter the character in square brackets to select option
Fig. 4-7-5 VLAN Port Configuration Menu
Screen Description
Port Displays a port number.
PVID Indicates a PVID (Port VLAN ID) that has been set to the port. PVID
displays VLAN ID to which untagged packet should be transferred when
it was received. The factory default setting is 1. When tagged packet
was received, destination port is determined by referring the tag
regardless of PVID.
Acceptable Indicates type of received frame.
Type
Admit
All
Tagged
Only
GVRP Indicates a status of GVRP. For all ports, 'Disabled' is the factory default
setting.
Enabled
Disabled
GVRP
Admit All Disabled
Admit All Disabled
Admit All Disabled
Admit All Disabled
Admit All Disabled
Admit All Disabled
Admit All Disabled
Admit All Disabled
Set [F]rame Type
Set [G]VRP Status
[Q]uit to previous menu
Receives all frames.
Receives only the tagged frames.
GVRP is enabled.
GVRP is disabled.
88