Rrp Domain Creation Menu - Panasonic PN28248 Operation Manual

4.6.10.a. RRP Domain Creation Menu
On the Ring Redundant Protocol Configuration Menu, pressing "C" opens the RRP
Domain Creation Menu screen as shown in Fig. 4-71. On the screen, you can cre-
ate a RRP domain.
PN28248 Local Management System
RRP Management -> RRP Domain Creation Menu
RRP Domain Name :
Primary Port
Secondary Port
Polling Interval : 1
Control VLAN
Data VLAN
-------------------------------- <COMMAND> -----------------------------------
Set RRP Domain [N]ame
Set [P]rimary Port
Set P[o]lling Interval
Set [C]ontrol VLAN
[A]pply
Command>
Enter the character in square brackets to select option
Screen Description
RRP Domain Displays the domain name.
Name
RRP Node Type Displays the node role.
Master
Transit
Primary Port Displays the primary port.
Secondary Port Displays the secondary port.
Polling Interval Displays the polling interval.
Fail Period Displays the timeout for polling.
Control VLAN Displays the control VLAN ID.
Data VLAN Displays the data VLAN ID.
:
:
:
:
Fig. 4-71 RRP Domain Creation Menu
Indicates that the Switching Hub controls the ring operation.
Each domain has only one master node.
Indicates that the Switching Hub is not a master node.
152
RRP Node Type :
Fail Period : 2
Set Node [T]ype
Set [S]econdary Port
Set [F]ail Period
Set [D]ata VLAN
[Q]uit to previous menu