Egress Rate Limiting Configuration Menu - Panasonic PN28248 Operation Manual

4.6.5.c.

Egress Rate Limiting Configuration Menu

On the Quality of Service Configuration Menu, pressing "WE" opens the Egress
Rate Limiting Configuration Menu screen, as shown in Fig. 4-52. On this screen,
you can configure the bandwidth control settings.
PN28248 Local Management System
Quality of Service Configuration -> Egress Rate Limiting Configuration Menu
Port Bandwidth
---- ----------- --------
1 1000
2 1000
3 1000
4 1000
5 1000
6 1000
7 1000
8 1000
9 1000
10 1000
11 1000
12 1000
Note: Bandwidth - 1Mbps/unit
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set [B]andwidth
Command>
Enter the character in square brackets to select option
Fig. 4-52 Egress Rate Limiting Configuration Menu
Screen Description
Port
Bandwidth
Status
Status
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Displays the port number.
Displays the bandwidth. The factory default setting is 1000. (The unit is
Mbps)
Displays whether the bandwidth control settings are enabled or disabled.
Enabled The bandwidth control settings are enabled.
Disabled The bandwidth control settings are disabled.
Set [S]tatus
[Q]uit to previous menu
116