Enable/Disable Individual System Log - Panasonic PN28248 Operation Manual

4.8.6.a.

Enable/Disable Individual System Log

On the System Log Menu, pressing "I" opens the Enable/Disable Individual System
Log Menu screen as shown in Fig. 4-88. This screen change the state of events for
events of save syslog.
PN28248 Local Management System
System Log -> Enable/Disable Individual System Log Menu
Link UP/DOWN
PoE ON/OFF
-------------------------------- <COMMAND> -----------------------------------
Set [L]ink UP/DOWN Log
Set P[o]E OFF/ON Log
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Link UP/DOWN Display the configure of enable/disable the save syslog when the link status
changes.
Enabled
Disabled
PoE PN/OFF Display the configure of enable/disable the save syslog when the PoE supply sta-
tus changes.
Enabled
Disabled
Available commands are listed below.
L Configure of enable/disable the save syslog when the link status changes.
Press "L." The command prompt changes to "Enable or Disable Link UP/DOWN Log(E/D)>."
Press "E" to enable of save syslog. Press "D" to disable it.
O Configure of enable/disable the save syslog when the PoE supply status changes.
Press "O." The command prompt changes to "Enable or Disable PoE ON/OFF Log(E/D)>."
Press "E" to enable of save syslog. Press "D" to disable it.
Q Return to the parent menu.
:Enabled
:Enabled
Fig. 4-88 System Log
Enable of save syslog.(Factory default)
Disable of save syslog.
Enable of save syslog.(Factory default)
Disable of save syslog.
181