Set Leave Mode Menu - Panasonic PN28248 Operation Manual

4.6.8.a.

Set Leave Mode Menu

On the IGMP Snooping Configuration Menu, pressing "L" opens the Set Leave
Mode Menu screen as shown in Fig. 4-57. On this screen, you can configure the
settings of operation after receiving a Leave packet.
PN28248 Local Management System
IGMP Snooping Configuration -> Set Leave Mode Menu
Leave Delay Time : 5 sec
Port
------ ------------
1
2
3
4
5
6
7
8
9
10
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[S]et Leave Mode
Command>
Enter the character in square brackets to select option
Screen Description
Leave Delay Time
Port
Mode
Mode
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
[P]revious Page
Set Leave Delay [T]ime
Fig. 4-57 Set Leave Mode Menu
Displays the waiting time after receiving a Leave packet.
The factory default setting is 5 seconds.
Displays the port number.
Displays the operation after receiving a Leave packet.
Normal Waits for the specified Leave Delay Time and then sends
the Leave packet from the multicast group member.
(Factory default setting)
Immediate Sends the Leave packet from the multicast group mem-
ber immediately after receiving it.
[Q]uit to previous menu
126