Easy Ip Address Setup Function - Panasonic PN28248 Operation Manual

5.3. Easy IP Address Setup Function

The following are points to note when using the easy IP address setup function.
[Known compatible software]
Panasonic Corporation "Easy IP Setup" V3.01/V4.00/V4.24R00
Panasonic System Networks Co., Ltd. "Easy Config" Ver3.10R00
Panasonic Eco Solutions Networks Co., Ltd.
[User-settable items]
* IP address, subnet mask, and default gateway
* System name
* This item can be configured only with the software "Easy Config."
In the software, the item is displayed as "Camera name."
[Restrictions]
* The time for accepting setting changes is limited to 20 minutes after power on
to ensure security. However, you can change settings regardless of the time
limit if the IP address, subnet mask, default gateway, user name, and password
values are set to factory defaults.
* Even after the time limit is reached, you can check the current settings dis-
played in a list.
* The following function of the software "Easy Config" cannot be used.
Auto setup function
* Please contact your manufacturer for information about network cameras.
" ZEQUO assist" Ver.2.1.1.1
190