Loop Detection Configuration Menu - Panasonic S24GPWR Operation Manual

4.5.6.

Loop Detection Configuration Menu

On the Advanced Switch Configuration Menu, pressing "D" opens the Loop Detec-
tion Configuration Menu screen as shown in Fig. 4-31. On this screen, you can con-
figure the Loop detection and blocking function settings.
For network configuration, refer to Appendix D "Network Configuration Example
and Notes Using Loop Detection and Blocking Function" in Basic Operation Man-
ual.
PN25249 Local Management System
Advanced Switch Configuration -> Loop Detection Configuration Menu
Global Loop Detection Status: Enabled
Port Trunk Link
---- ----- ---- ----------- ------------- -------- ---------- ---------------
1 --- Up
2 --- Down Forwarding Enabled
3 --- Down Forwarding Enabled
4 --- Down Forwarding Enabled
5 --- Down Forwarding Enabled
6 --- Down Forwarding Enabled
7 --- Down Forwarding Enabled
8 --- Down Forwarding Enabled
9 --- Down Forwarding Enabled
10 --- Down Forwarding Enabled
11 --- Down Forwarding Enabled
12 --- Down Forwarding Enabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[E]nable/Disable Loop Detection
Loop History [I]nformation
Command>
Enter the character in square brackets to select option
Screen Description
Global Loop Detec-
tion Status
Port
Trunk
Link
State
Loop Detect
State Loop Detect
Forwarding Enabled
Fig. 4-31 Loop Detection Configuration Menu
Displays the status of the Loop detection and blocking function.
Enabled The Loop detection and blocking function is enabled. (Fac-
tory default setting)
Disabled The Loop detection and blocking function is disabled.
Displays the port number.
Displays the link aggregation group ID.
Displays the link-up status.
Up Linking up.
Down Linking down.
Displays the operation of the Loop detection and blocking function.
Forwarding Sending packets normally.
Loop Detect Detecting a loop and blocking a port.
Displays the status of the Loop detection and blocking function for each
port.
Enabled The Loop detection and blocking function is enabled.
(Factory default setting: Ports 1 to 22)
Disabled The Loop detection and blocking function is disabled.
(Factory default setting: Ports 23 to 24)
Mode Recovery
Block Enabled
Block Enabled
Block Enabled
Block Enabled
Block Enabled
Block Enabled
Block Enabled
Block Enabled
Block Enabled
Block Enabled
Block Enabled
Block Enabled
Set Port [L]oop Detect Status
Set Port Recovery [S]tatus
Set Port Recovery [T]imer
[Q]uit to previous menu
98
Recovery Time
60
60
60
60
60
60
60
60
60
60
60
60