Storm Control Configuration Menu - Panasonic PN28248 Operation Manual

4.6.6.

Storm Control Configuration Menu

On the Advanced Switch Configuration Menu, pressing "O" opens the Storm Con-
trol Configuration Menu screen, as shown in Fig. 4-54. On this screen, you can con-
figure the settings of storm control of unknown unicast, broadcast, and multicast.
PN28248 Local Management System
Advanced Switch Configuration -> Storm Control Configuration Menu
Port Storm Control Setting:
No. DLF
---- ---------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set [D]LF Status
Command>
Enter the character in square brackets to select option
Screen Description
DLF: Enables/disables the unknown unicast storm control.
Enabled
Disabled
Broadcast: Enables/disables the broadcast storm control.
Enabled
Disabled
Multicast: Enables/disables the multicast storm control.
Enabled
Disabled
Threshold: Displays the threshold of the number of packets (Packet Per Second).
Broadcast Multicast
--------- ---------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Set [B]roadcast Status
Set [M]ulticast Status
Set [T]hreshold Value
Fig. 4-54 Storm Control Configuration
The unknown unicast storm control is enabled.
The unknown unicast storm control is disabled. (Factory default set-
ting)
The broadcast storm control is enabled.
The broadcast storm control is disabled. (Factory default setting)
The multicast storm control is enabled.
The multicast storm control is disabled. (Factory default setting)
119
Threshold
---------
0
0
0
0
0
0
0
0
0
0
[Q]uit to previous menu