Door Window Reset; Front Seat Reset - Aston Martin DB 9 2013 Manual

Door Window Reset

If power to the electric windows has been interrupted for any reason,
they will fail to operate correctly until reset.
1. Sit in the driver's seat with all doors closed, insert the vehicle
key into the ignition control and move to position 'II' (ignition
ON).
2. Press firmly and hold the window switch until the window is at
the maximum down position. Continue to hold the button for
five seconds then release.
3. Pull back and hold the window switch until the window is in the
maximum up position. Continue to hold the switch for a further
five seconds, then release.
4. The window is now reset. Repeat for the other door windows.
11.34

Front Seat Reset

Should a front seat fail to move or the seat memory position fails to
work this may show a loss of seat position in the vehicle's memory. If
so, complete the seat reset procedure detailed below:
Warning: Do not sit in the seat while you do the seat reset
procedure. Seat movement will restrict the occupancy area.
Warning: Make sure that there is nothing in front of, behind,
or under the seat during the seat reset procedure.
[1] : Raise or lower the front of the seat.
[2] : Move the seat forwards or rearwards.
[3] : Raise or lower the rear of the seat.
[4] : Raise or lower the front of the seat.
Use the seat switch to move the seat base to the most rearward and
lowest position and tilt the seat back to the most forward position.
Early vehicle models may need to move the seat base to the most
forward and lowest position.
Press and hold the seat switch, for each movement, until all seat
movement has stopped, then release.
The seat movement and position memory should now work
correctly, if not contact your Aston Martin Dealer.