Door Window Reset; Front Seat Reset - Aston Martin Vantage S 2016 Owner's Manual

To renew a bulb:
1. Take care not to damage the vehicle trim.
2. Lever out the lens unit and replace the faulty bulb. Door puddle
lamps only: Open the access flap and replace the faulty bulb.
3. Press the lens unit into its housing until it clips into position.
12.28

Door Window Reset

If power to the electric windows has been interrupted for any reason,
they will fail to operate correctly until reset.
1. Sit in the driver's seat with all doors closed, insert the vehicle
key into the ignition control and move to position 'II' (ignition
ON).
2. Press firmly and hold the window switch until the window is at
the maximum down position. Continue to hold the button for
five seconds then release.
3. Pull back and hold the window switch until the window is in the
maximum up position. Continue to hold the switch for a further
five seconds, then release.
4. The window is now reset. Repeat for the other door windows.

Front Seat Reset

Should a front seat fail to move or the seat memory position fails to
work this may show a loss of seat position in the vehicle's memory. If
so, complete the seat reset procedure detailed below:
Warning: Do not sit in the seat while you do the seat reset
procedure. Seat movement will restrict the occupancy area.
Warning: Make sure that there is nothing in front of, behind,
or under the seat during the seat reset procedure.
The seat must be moved to its limit of travel and allowed to stall
for 1 second for each axis. If the seat is not held at its limit of travel,
the seat memory will not learn this as its fully travelled position.