Operator's Seat; Access Panel - BOMBARDIER 2006 outlander max 400 Operator's Manual

Storage Box Installation
– Position storage box onto rear fend-
er.
– When storage box rests in its posi-
tion, firmly push down to latch.
– To open storage box, unhook the
rubber latch.
vmo2006-008-012_b
1. Rubber latch

17) Operator's Seat

NOTE: To remove the operator's seat,
the passenger's seat or storage box
removal is necessary.
Seat Removal
To remove the operator's seat, push
its latch forward. This latch is located
underneath the rear of seat.
vmo2006-008-011_a
1. Seat latch
Pull seat rearward. Continue lifting
movement until you can release the
front retaining device then completely
remove seat.
Seat Installation
Insert front tabs of seat into frame
hooks. When seat rests in its position,
firmly push seat down to latch.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure
by giving it a tug to confirm proper
latching.
V07L05Y
1. Insert these tabs in hooks
2. Hooks
Make sure seat is securely latched
before riding.

18) Access Panel

The access panel is located on the
front fender, between front racks. To
open the panel, unlatch, lift then re-
move it completely.
_____________________
1
2
WARNING
97