025: Answering Machine Connection Function Signal Detection Time; 027: V.21 Low-Speed Flag Preamble Identification Length; <056 - 061: Count Type Select - Canon mf6600 Series Service Manual

<025: Answering machine connection function signal
detection time>
Sets the signal detection time for the answering machine connection function operation.
When the answering machine connection function is operating, if the function does not
operate normally because the fax does not detect CNG signal sent from the line, raise this
parameter to increase the signal detection time.
<027: V.21 low-speed flag preamble identification
length>
Use it to detect the time of detection after which command analysis is started after
detecting V.21 low-speed command preambles continuously for a specific period of time.
8
Service Mode > Numeric Parameter Settings (Numeric Param.) > <056 - 061: Count type select >
8 Service Mode > Numeric Parameter Settings (Numeric Param.) > <056 - 061: Count type select >
<056 - 061: Count type select >
Use it to confirm the count type indicated on the Counter Check screen, which appears in
response to a press on the Counter key.
When '0' is selected, count type will not be indicated.
No.56: Use it to indicate the type of software counter 1 of the control panel. The type of soft
counter 1 cannot be changed.
No.57: Use it to change the type of soft counter 2* of the control panel to suit the needs of
the user.
No.58: Use it to change the type of soft counter 3* of the control panel to suit the needs of
the user.
No.59: Use it to change the type of soft counter 4* of the control panel to suit the needs of
the user.
No.60: Use it to change the type of soft counter 5* of the control panel to suit the needs of
the user.
No.61: Use it to change the type of soft counter 6* of the control panel to suit the needs of
the user.
*:The default type settings of soft counter is different from models.
<Soft Counter Specifications>
The soft counters are classified a follows in terms of input numbers:
100s: total
200s: copy
300s: print
400s: copy + print
500s: scan
700s: received file print
800s: report pint
900s: transmitted scan
Guide to the Table
- 1:Count sheets of all sizes by one.
- 2:Count sheets of the large size by two.
- C:full color
- Bk:black mono
- L:large size (larger than A4/LTR)
- S:small size (A4/LTR or smaller)
8-16
8-16