Removing The Speaker (Type; Preparations; Procedure - Canon mf6600 Series Service Manual

4
Disassembly/Assembly > Controller System > Removing the Speaker (TYPE II) > Procedure
Removing the Speaker (TYPE II)
■

Preparations

1) Removing the Left Cover.(Refer to page 4-19)
2) Removing the Controller Cover.(Refer to page 4-55)
■

Procedure

1) Remove the harness [1] of the Multi-purpose Tray Pickup Solenoid and the harness [2] of
the Speaker from the Harness Guide [3].
2 Connectors [4]
•
1 Wire Saddle [5]
•
1 Edge Saddle [6]
•
[5]
[4]
[3]
4 Disassembly/Assembly > Controller System > Removing the Speaker (TYPE II) > Procedure
[6]
[1]
[2]
F-4-221
2) Remove the Speaker [1].
3 Claws [2]
•
x3
[1]
[2]
MEMO:
At installation, be sure to install the harness [1] of the Speaker followed by the harness [2]
of the Multi-purpose Tray Pickup Solenoid.
x2
[1]
4-92
[2]
F-4-222
[2]
F-4-223
4-92