Counter Indication (Counter); Counters; Clearing Counters; Report Output (Report) - Canon mf6600 Series Service Manual

Counter Indication (Counter)

Counters

This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be
used to gain rough measures of when to replace supplies. The counter set increments by
one on counting each sheet of small-sized paper (up to A4/LTR) and by two on counting
each sheet of large-sized paper (larger than A4/LTR).
Maintenance counter list
Item Counter
TOTAL (Total counter)
SERVICE1
SERVICE2
TTL
COPY
PDL-PRT
FAX-PRT
RPT-PRT
2-SIDE
SCAN
PICK-UP (Paper pickup counter)
C1
C2
C3
C4
MF
2-SIDE
FEEDER (Feeder related counters) FEED
DFOP-CNT
TTL
JAM (Jam counters)
FEEDER
SORTER
2-SIDE
MF
C1
C2
C3
C4
MISC (Other required counter) WST-TNR
8
Service Mode > Report Output (Report) > Report Output
Explanation
Service total counter 1
Service total counter 2
Total counter
Total copy counter
PDL print counter
Fax print counter
Report print counter
Double-sided copy/print counter
Scan counter
Cassette jam counter
Not used
Not used
Not used
Multi-purpose tray pickup total counter
Double-sided paper pickup total counter
ADF pickup total counter
Not used
Unit total jam count
ADF total jam count
Not used
Duplex unit jam counter
Multi-purpose tray jam counter
Cassette jam counter
Not used
Not used
Not used
Not used
T-8-38 T-8-38
8 Service Mode > Report Output (Report) > Report Output

Clearing Counters

- Maintenance counter all clear
Execute service mode > CLEAR > COUNTER to clear all maintenance counters.

Report Output (Report)

Report Output

The table below lists the kinds of reports that are supported.
Item
SERVICE DATA LIST Service mode service soft switch output (SSSW, MENU, NUMERIC
Param., SPECIAL, NCU, SCAN, PRINT, SYSTEM, ROM, start date)
SYSTEM DATA LIST Service mode service soft switch output (SSSW, MENU, NUMERIC
Param., SPECIAL, NCU, SCAN, PRINT, SYSTEM, ROM, start date)
Transmission count, reception count, record chart count, error count
System dump list output
SYSTEM DUMP LIST
and other outputs
COUNTER REPORT
Counter output
ERROR LOG LIST
Not used
SPEC LIST Type setting, print speed, memory size, ROM indication, adjustment
data and other outputs
SERVICE LABEL
Not used
8-22
Explanation
T-8-39 T-8-39
8-22