Menu Switch Settings (Menu); Menu Switch Composition; No.005 Nl Equalizer; No.006 Telephone Line Monitor - Canon mf6600 Series Service Manual

Menu Switch Settings (Menu)

Menu Switch Composition

No. Function
NL equalizer
005
006 telephone line monitor
007 transmission level (ATT)
008 V.34 modulation speed upper limit
009 V34 data speed upper limit
010 Frequency of pseudoring signal
<No.005 NL equalizer>
Use it to enable-disable the NL equalizer.
If errors occur often during communication because of the condition of the line, enable (ON)
the NL equalizer.
Any of the following error codes may be indicated at time of transmission because of the line
condition:
##100, ##101, ##102, ##104, ##201, ##281, ##282, ##283, ##750, ##755, ##765, ##774, ##779,
##784, ##789
Any of the following error codes may be indicated at time of transmission because of the line
condition:
##103, ##107, ##114, ##201, ##790, ##793
<No.006 telephone line monitor>
Use it to s the telephone line monitor function:
DIAL: generate the monitor sound of the telephone line using the speaker from the start of
transmission to DIS.
SERVICEMAN [1]: generate the monitor sound of the telephone line using the speaker
from the start of communication to the end of it.
SERVICEMAN [2]: generate the monitor sound of the telephone line2 (Option).
OFF: do not generate the monitor sound of the telephone line using the speaker.
8
Service Mode > Menu Switch Settings (Menu) > <No.010 Frequency of the pseudo CI signal>
Range of settings
1: ON, 0: OFF
0:DIAL, 1:SERVICEMAN1, 2:SERVICEMAN2, 3:OFF
from 0 to 15 (ex: 15= -15 dBm)
0:3429, 1:3200, 2:3000, 3:2800, 4:2743, 5:2400
0:33.6 kbps, 1:31.2 kbps, 2:28.8 kbps, 3:26.4 kbps,
4:24.0 kbps, 5:21.6 kbps, 6:19.2 kbps, 7:16.8 kbps,
8:14.4 kbps, 9:12.0 kbps, 10:9.6 kbps, 11:7.2 kbps,
12:4.8 kbps, 13:2.4 kbps
0:50 Hz, 1:25 Hz, 2:17 Hz, 3:20 Hz
8 Service Mode > Menu Switch Settings (Menu) > <No.010 Frequency of the pseudo CI signal>
<No.007 ATT transmission level>
Use it to set the transmission level (ATT).
Raise the transmission level if errors occur frequently at time of communication because of
the condition of the line. (It means close to 8)
Any of the following error codes may be indicated at time of transmission because of the line
condition:
##100, ##101, ##102, ##104, ##201, ##280, ##281, ##282, ##283, ##284, ##750, ##752, ##754,
##755, ##757, ##759, ##760, ##762, ##764, ##765,
##767, ##769, ##770, ##772, ##774, ##775, ##777, ##779, ##780, ##782, ##784, ##785, ##787,
##789
Any of the following error codes may be indicated at time of reception because of the line condition:
##103, ##106, ##107, ##201, ##793
T-8-30 T-8-30
<No.008 V.34 modulation speed upper limit>
Use it to set an upper limit to the modulation speed (baud rate) for the V.34 primary
channel.
<No.009 V.34 data speed upper limit>
Use it to set an upper limit to the data transmission speed for the V.34 primary channel
between 2.4K and 33.6K bps in increments of 2400 bps. (0: 2.4K to 13: 33.6K bps).
<No.010 Frequency of the pseudo CI signal>
T-8-31 T-8-31 You may select a frequency for the pseudo CI signal.
Some types of external telephones do not ring when the fax/tel switch-over function is ON.
To sound the ring, change the pseudo CI signal.
8-13
T-8-32 T-8-32
8-13