Canon mf6600 Series Service Manual page 184

Display Detail
Main Cause/Symptom
Code Code
E808 0 Fixing drive circuit failure
- The heater does not turn on.
- A fixing drive motor failure was
detected.
7
Error Codes > Error Code
Countermeasure
- Check the connector of the fixing film
unit.
- Replace the fixing film unit.
- Replace the fixing drive motor.
- Replace the Engine controller PCB.
- Replace the power supply PCB.
T-7-1 T-7-1
7 Error Codes > Error Code
The following are the error codes used in the image transmission function with network.
Send Recive
Error
Code SMTP FTP SMB SMTP POP3
Yes
#705
Yes
#751
Yes Yes Yes
#752
Yes Yes Yes Yes Yes
#753
Yes Yes Yes
#755
Yes Yes Yes
#801
Yes Yes Yes
#802
Yes Yes
#804
Yes Yes Yes
#806
Yes
#808
Yes
#810
Yes
#812
Yes
#813
Yes Yes
#819
Yes Yes
#820
Yes Yes
#821
Yes Yes
#827
Yes Yes
#828
Yes Yes
#829
Yes
#839
Error detail
Exceeded max. image size per document
Exceeded max number of image pages
(100 pages) in PDF transmission
Failed to connect to server (Socket level)
Disconnected the network (Socket is closed.)
Failed to connect to server (Socket level)
Disconnected the network (Socket is closed.)
Occurred socket errors other than E751/E752
It started beginning to transmit before the network
was connected.
Returned error from SMTP server
SMTP protocol time out
Exceeded the specified connecting time limit.
Failed in name resolution using DNS server
Returned error from FTP server
(No access right to the folder)
Returned error from FTP server
(User name/Password)
Returned error from FTP server
(Other than E804/E806)
FTP protocol time out
Exceeded the specified connecting time limit.
Returned error from POP3 server
POP3 protocol time out
Exceeded the specified connecting time limit.
POP3 password error
POP3 login name error
MIME data error
Base64/uuencode error
TIFF analysis error
non support MIME receive
Type of HTML mail receive error
Exceeded max receivable size
SMTP AUTH authentication error
(email and iFAX transmitt
7-3
T-7-2 T-7-2
7-3