Canon mf6600 Series Service Manual page 106

4
Disassembly/Assembly > Document Exposure, Feed System > Removing the CIS Unit > Procedure
2) Remove the CIS Mount [1] Upward and Remove the Flat Cable [2].
[2]
CAUTION:
When CIS Unit Mount is tilt, CIS spacers[1] are removed. Do not lost the CIS spacers.
[1]
4 Disassembly/Assembly > Document Exposure, Feed System > Removing the CIS Unit > Procedure
[1]
F-4-102 F-4-102
[1]
F-4-103 F-4-103
3) Lift the CIS [1] and Remove It In the Direction of the Arrow.
CAUTION:
When installing the CIS Unit, be sure to check that the projection [1] is fitted to the dent [2]
to install.
[2] [1]
[1]
F-4-104 F-4-104
[2] [1]
F-4-105 F-4-105
4-49
4-49