Removing The Controller Box (Type; Preparations; Procedure - Canon mf6600 Series Service Manual

4
Disassembly/Assembly > Controller System > Removing the Controller Box (TYPE I) > Procedure
Removing the Controller Box (TYPE I)
■

Preparations

1) Removing the Right Cover.(Refer to page 4-23)
2) Removing the Left Cover.(Refer to page 4-19)
3) Removing the Left Rear Cover.(Refer to page 4-22)
4) Removing the Controller Cover.(Refer to page 4-55)
5) Removing the NCU PCB.(Refer to page 4-58)
6) Removing the ADF/Reader Driver PCB.(Refer to page 4-55)
7) Removing the Main Controller Board.(Refer to page 4-56)
8) Removing the All-night Power PCB Mount.(Refer to page 4-59)
■

Procedure

1) Remove the 3 Harnesses [1] from the Harness Guide [2].
2 Edge Saddle [3]
•
x3
4 Disassembly/Assembly > Controller System > Removing the Controller Box (TYPE I) > Procedure
[3]
[2]
[1]
F-4-129
2) Remove the Harness Guide [1].
3 Claws [2]
•
x3
[2]
3) Remove the 2 Flat Cable [1] from the Harness Guide [2].
4-61
[1]
[2] [2]
F-4-130
[1] [2]
F-4-131
4-61