Canon mf6600 Series Service Manual page 198

SSSW-SW18
List of Functions
■
Bit Function
Detection of carrier disconnection between
0
the DCS signal and the TCF signal
1 Waiting time for carrier disconnection
between the DCS signal and the TCF signal
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
■
Detailed Discussions of Bit 0
It is possible to select whether or not to detect carrieir disconnection between the DCS
signal and the TCF signal during reception.
If the receiving machine returns an FTT signal while the other machine (PC-FAX) is
transmitting a TCF siganl and a reception error occurs, set this bit to "1".
If thw error still occurs, set bit 1 of #SSSW SW18 to "1".
■
Detailed Discussions of Bit 1
It is possible to select the detection time for caarrier disconnection between the DCS signal
and TCF signal during reception.
This bit is available for use when #SSSW SW18 Bit0 is set to "1".
If the symptom is not resolved by setting SW18 Bit 0 to "1," set this bit to "1."
8
Service Mode > Service Soft Switch Settings (SSSW) > SSSW-SW25 > Detailed Discussions of Bit 2
1 0
Yes No*
300 msec*
600 msec
- -
- -
- -
- -
- -
- -
T-8-26 T-8-26
8 Service Mode > Service Soft Switch Settings (SSSW) > SSSW-SW25 > Detailed Discussions of Bit 2
SSSW-SW25
List of Functions
■
Bit Function
0 Transmission telephone
numbers displayed on reports
1 not used
Action when receiving blank CSI Disregard
2
3 not used
4 not used
5 not used
6 not used
7 not used
■
Detailed Discussions of Bit 0
Selects the transmission telephone number displayed on reports after the completion of
transmission.
When "Called number" is selected, the telephone number the fax called is displayed on
reports.
When "Other fax number" is selected, the telephone number sent from the other fax (the
CSI signal data) is displayed on reports.
■
Detailed Discussions of Bit 2
When "Disregard" is selected, the received blank CSI is disregarded and a dialed number,
if any, is displayed on LCD/report.
When "Receive" is selected, LCD/report is blank if the dialed number is known.
8-11
1 0
Other fax number Called number
- -
Receive
- -
- -
- -
- -
- -
T-8-27 T-8-27
8-11