4
Disassembly/Assembly > Fixing System > Removing the Fixing Unit > Procedure (TYPE I)
Fixing System
Location
Key
Name
Service Pars No.
[1]
Fixing Unit
RM1-6405
RM1-6406
4
Disassembly/Assembly > Fixing System > Removing the Fixing Unit > Procedure (TYPE I)
[1]
F-4-234
Remarks
Reference
(120V)
(Refer to page
4-98)
(230V)
T-4-15
Removing the Fixing Unit
■
Preparations
1) Removing the Left Cover.(Refer to page 4-19)
2) Removing the Left Rear Cover.(Refer to page 4-22)
3) Removing the Right Cover.(Refer to page 4-23)
4) Removing the Rear Cover Unit.(Refer to page 4-27)
Procedure (TYPE I)
■
CAUTION:
When Removing the Fixing Unit, Perform the Operation After the Fixing Unit is Surely
Cooled.
The Fixing Unit Just After Printing May Cause Burn Injury.
1) Close the Front Cover and Move the Gear In the Position Where It Can Be Removed.
2) Remove the 3 Gears [1].
[1]
4-98
[1]
F-4-235
4-98